Alcatel XFP Bedienungsanleitung PDF herunterladen (Seite 19)

Installing 10GBase MDA

7210 SAS-M 10-GBase MDA Page 19

Installing an MDA into the Expansion Slot

MDAs can be installed into the expansion slot on the chassis.

Figure 1: Installing an MDA into the Expansion Slot

To install an MDA in the chassis:

Step 1 Remove the expansion slot cover from the chassis.

Step 2 Remove MDA from the packaging and place on a flat anti-static work surface. Avoid

touching board components and connector pins.

Step 3 Insert the MDA into expansion slot on the chassis. Align the MDA with the slot guides and

the captive screw with the threaded receptacle.

Step 4 Press the MDA firmly into the slot. Make sure that the connectors are fully seated in the

slot receptacle. The faceplate of the MDA should be flush with the chassis faceplate.

Step 5 Tighten the captive screws to secure the MDA. Do not over-tighten. The maximum

recommended torque is 4-6 lbf.in.

SR72043

1 2 ... 14 15 16 17 18 19 20 21 22

Keine Kommentare

Alcatel XFP Bedienungsanleitung Seite 19