Alcatel OS6602-24 Betriebsanweisung PDF herunterladen (Seite 78)

Open Problem Reports and Feature Exceptions

page 78 OmniSwitch 6600/7000/8800—Release 5.1.5.R04

PR 84471

On an OS7000, the yipped field gets changed.

Workaround: There is no known workaround at this time.

PR 84500

On an OS7000, once UDP framed is relayed, its TTL value is always set to 32 secs (hex 20)

Workaround: There is no known workaround at this time.

PR 84592

In certain cases, frames get duplicated with UDP Relay on an OS7000.

Workaround:

1. With VRRP, enabling only on one VRRP router (either master or backup) is desirable for any UDP

relay service to avoid UDP frames being duplicated.

2. If there are ECMP routes, enabling on one backbone VLAN is desirable for any UDP relay service.

3. If 802.1Q is configured on multiple switches, UDP relay service only needs to be enabled on one

switch.

VRRP

Problem Reports

PR 61934

OS7000 does not support VRID 0. OmniCore does

Workaround: Do not use VRID 0 on the OmniCore other devices when running VRRP with the OS7000.

PR 62272

Exceeding the multicast software routing processing limits can introduce instability to VRRP master to

backup communications resulting in VRRP switching between master and backup states frequently on the

OS7000.

Workaround: Reduce the amount of IP multicast traffic running through the affected NI.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 119 120

Keine Kommentare

Alcatel OS6602-24 Betriebsanweisung Seite 78