Alcatel 9000 Betriebsanweisung PDF herunterladen (Seite 327)

100

101

Configuring RDP Quick Steps for Configuring RDP

OmniSwitch 6800/6850/9000 Network Configuration Guide June 2006 page 17-3

Quick Steps for Configuring RDP

Configuring RDP involves enabling RDP operation on the switch and creating RDP interfaces to adver-

tise VLAN router IP addresses on the LAN. There is no order of configuration involved. For example, it is

possible to create RDP interfaces even if RDP is not enabled on the switch.

The following steps provide a quick tutorial on how to configure RDP. Each step describes a specific

operation and provides the CLI command syntax for performing that operation.

1 Enable RDP operation on the switch.

-> ip router-discovery enable

Note. Optional. To verify the global RDP configuration for the switch, enter the show ip router-discov-

ery command. The display is similar to the one shown below:

-> show ip router-discovery

Status = Enabled,

RDP uptime = 161636 secs

#Packets Tx = 4,

#Packets Rx = 0,

#Send Errors = 0,

#Recv Errors = 0,

For more information about this command, refer to the “RDP Commands” chapter in the OmniSwitch CLI

Reference Guide.

2 Use the following command to create an RDP interface for an IP router interface. In this example, an

RDP interface is created for the IP router interface named Marketing (note that the IP interface is refer-

enced by its name).

-> ip router-discovery interface Marketing enable

3 When an RDP interface is created, default values are set for the interface advertisement destination

address, transmission interval, lifetime, and preference level parameters. If you want to change the

default values for these parameters, see “Creating an RDP Interface” on page 17-8.

Note. Optional. To verify the RDP configuration for all RDP interfaces, enter the show ip router-

discovery interface command. The display is similar to the one shown below:

-> show ip router-discovery interface

IP i/f RDP i/f VRRP i/f Next #Pkts

Name status status status(#mast) Advt sent recvd

---------------------+--------+--------+--------------+----+----------

Marketing Disabled Enabled Disabled(0) 9 0 0

Finance IP Network Disabled Enabled Disabled(0) 3 0 0

1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 701 702

Kommentare zu diesen Handbüchern

Keine Kommentare

Alcatel 9000 Betriebsanweisung Seite 327

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Alcatel 9000