Alcatel 9000 Betriebsanweisung PDF herunterladen (Seite 54)

100

101

Setting Combo Ethernet Port Parameters on OmniSwitch 6800 and 6850 Switches Configuring Ethernet Ports

page 1-18 OmniSwitch 6800/6850/9000 Network Configuration Guide June 2006

Setting Combo Ethernet Port Parameters on

OmniSwitch 6800 and 6850 Switches

The following sections describe how to use CLI commands to configure combo ports on OmniSwitch

6800 and 6850 switches only.

• Ports 21–24 on the OmniSwitch 6800-24 and OmniSwitch 6850-24 switches are combo ports.

• Ports 45–48 on the OmniSwitch 6800-48 and OmniSwitch 6850-48 switches are combo ports.

Setting the Combo Port Type and Mode

By default, all combo ports on OmniSwitch 6800 Series and OmniSwitch 6850 Series switches are set to

preferred fiber. The following subsections describe how to set a single combo port, a range of combo

ports, or all combo ports on an entire switch to forced fiber (see “Setting Combo Ports to Forced Fiber” on

page 1-18), preferred copper (“Setting Combo Ports to Preferred Copper” on page 1-19), forced copper

(“Setting Combo Ports to Forced Copper” on page 1-19), and preferred fiber (“Setting Combo Ports to

Preferred Fiber” on page 1-20).

Note. See “OmniSwitch 6800 and 6850 Series Combo Ports” on page 1-4 for an overview of combo port

types and modes.

Setting Combo Ports to Forced Fiber

In forced fiber mode, combo ports will always use the fiber MiniGBIC SFP port instead of the equivalent

copper RJ-45 10/100/1000 port. To set a single combo port, a range of combo ports, or all combo ports on

a switch to forced fiber, use the interfaces hybrid forced-fiber command.

To set all combo ports on an entire switch to forced fiber mode, enter interfaces, followed by the slot

number and hybrid forced-fiber. For example, to set all combo ports on slot 2 to forced fiber, enter:

-> interfaces 2 hybrid forced-fiber

To set a single combo port to forced fiber, enter interfaces, followed by the slot number, a slash (/), the

port number, and hybrid forced-fiber. For example, to set port 47 on slot 1 to forced fiber, enter:

-> interfaces 1/47 hybrid forced-fiber

To set a range of combo ports to forced fiber ports, enter interfaces, followed by the slot number, a

slash (/), the first port number, a hyphen (-), the last port number, and hybrid forced-fiber. For example,

to set combo ports 46 through 48 on slot 1 to forced fiber, enter:

-> interfaces 1/46-48 hybrid forced-fiber

As an option, you can document the interface type by entering ethernet, fastethernet, or gigaethernet

before the slot number. For example, to set port 47 on slot 1 to forced fiber and document the interface

type as Gigabit Ethernet, enter:

-> interfaces gigaethernet 1/47 hybrid forced-fiber

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 701 702

Kommentare zu diesen Handbüchern

Keine Kommentare

Alcatel 9000 Betriebsanweisung Seite 54

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Alcatel 9000